Beading- szafirowy naszyjnik - ...

[ Pobierz całość w formacie PDF ]
Birth
Stones
September:
Sapphire
Sapphires are beautiful, expensive
stones prized for their distinctive
blue color. If your budget doesn’t
accommodate sapphires at the
moment, consider substituting
Swarovski crystals in sapphire
blue, as we did in this Y-shaped
chain necklace.
A
B
C
1.
To make a crystal unit, cut
a 3
1
⁄
2
-in. (9cm) length of wire.
Using chainnose pliers, bend
the wire into a right angle
about 1
1
⁄
4
in. (3cm) from one
end and make the first half
of a wrapped loop (Basic
Techniques, p. 82). String a
crystal on the wire, leave
1
⁄
8
in. (3mm) of space, and
make the first half of another
wrapped loop. Prepare a
total of nine crystal units.
2.
String the remaining
crystal onto a head pin.
Make the first half of a
wrapped loop close to
the crystal.
3
. Use wire cutters to cut nine
3
⁄
4
-in. (2cm) chain segments
(each with an equal number of links). Slide the end link of
one chain segment into an unfinished loop on a crystal unit.
Slide another chain segment into the unit’s other loop.
D
4.
Complete the wrapped loops (Basic Techniques) on the crystal unit. Attach another crystal
unit to the end chain link and add another chain segment.
20
BEADSTYLE
SEPTEMBER 2003
E
Supply
List
5.
Complete the wrapped loops as before. Attach a crystal unit to the end link,
but this time, don’t add another chain segment. Make two additional sections of
crystal units and chain segments identical to the first. You’ll have a total of three
chain sections.
•
10
6mm Swarovski cube-shaped
crystals, sapphire blue
•
2 ft. (61cm) chain
•
4 ft. (1.2m) 22-gauge wire
•
head pin
•
lobster claw clasp
•
2
split rings
•
chainnose and roundnose pliers
•
split ring pliers (optional)
•
diagonal wire cutters
F
G
H
6.
Slide the end link from
one of the chain sections
into the loop on the head
pin unit. Complete the
wrapped loop. This section
becomes the necklace’s
center dangle.
7.
Slide the end links of the two remaining chain
sections into the unfinished loop on the dangle’s
crystal unit. Complete the wrap. These chain
sections form the necklace’s front sections.
8.
Cut two 4- to 5-in. (10-13cm) chain
segments. Slide the end links into the
unfinished loops on the front section’s
crystal units. Complete the wraps.
I
J
9.
Attach a split ring to each of the end chain links.
10.
Attach a lobster claw clasp to either
split ring.
✤
WWW.BEADSTYLEMAG.COM
21
[ Pobierz całość w formacie PDF ]